Skip to Content

TUAW Review: Kanex HDMI + audio adapter works fine but costs extra

When we first heard about the Kanex HDMI + digital audio converter a few weeks ago, I was eager to give it a trial run and see if it managed to deliver on the promise of integrated audio with HDMI video. I've been playing with the $70 unit for a few days now, and the answer is a qualified yes: it does the job, but depending on your home theater setup you may be able to get by with a less expensive option.

The digital-audio Kanex unit ships without a manual and is largely self-explanatory (although the company has now posted a basic user guide and FAQ) -- a female HDMI port on one side of the roughly iPod-sized unit, and three male cables coming out the other side. The cables connect to the mini DisplayPort, optical audio out, and USB port of your Mac; while Kanex does sell a $60 unit that handles audio over USB, this version only uses that connection to power the adapter and does not provide a USB audio interface. If you're running short of open powered USB ports you might opt to plug it into a USB power adapter instead.

In operation, there's not much to worry about: I plugged in all three ports to a unibody MacBook Pro and connected an HDMI display, then went to the normal Mac OS X Displays preference pane, where I found a full assortment of resolutions for my enjoyment. The top few 'television' options may vary with your connected gear; on my test set (a Vizio 42" 720p display) I was able to choose 720p and, oddly enough, 1080i and 1080p. Below that you have resolutions ranging from 640x480 up into the 1600x1000 range.


The 'Options' tab in the preference pane gives you exactly two options: a checkbox to turn Overscan on and off (either losing a bit of the screen real estate over the edges, or leaving a small black border around the image) and a seemingly-inactive "Best for Video" checkbox that remained a mystery to me while I was testing.

On the audio side, choosing 'Digital Audio Out' from your Sound preference pane will route your output through the adapter. Unfortunately I don't have a full-optical receiver setup -- I think the next test site for this adapter will be David W.'s home theater, to give it a fair shake -- but the audio quality and levels sounded comparable or better than my usual analog link, at least to these amateur ears.

Although I expected that the 720p setting would look best, matching the native resolution of the display, it actually looked rather hard-edged; type and onscreen graphics had slight halos, although that effect was mostly unnoticeable when playing video. I got better results from choosing 1080p (perhaps because it brought the display's own downscaling circuit into play) or the 1344x756 resolution. In either case, the screen detail was good and the display was clear and sharp, without any noticeable lag or bleeding.

I played back a few different content types, including iTunes-purchased HD television shows, DVD movie backups from Handbrake, live HDTV via the Elgato EyeTV tuner, and streaming 480p content from Hulu; they all looked as good as they did on the MBP's internal screen. Audio was synchronized and clear across all sources.

I did a couple of comparisons to see how the Kanex compared to other signal paths or HDMI sources. First, I watched a few minutes of the same episode of Dollhouse both from an iTunes HD purchase and from my Dish Network HD DVR. While the DVR playback seemed a bit more fluid and watchable, the iTunes ep also looked very good, even showing some shadow detail that wasn't visible on the broadcast version.

The next comparison was versus a DisplayPort-to-VGA adapter plus analog audio cable; since my TV sports a VGA connector, it's easy to use it as an external display, although the two-cable solution is not as elegant as a single HDMI. The VGA seemed a trifle sharper and didn't have the overscan/underscan option of the Kanex; it filled the screen correctly at both the 1344x756 and at the 1280x720 resolutions. Again, I couldn't hear a marked difference between the optical and analog audio paths, but that's more a reflection of my speakers than a gloss on the quality of the optical link.

While the EyeTV content looked comparable on the VGA and HDMI paths, there was a very big difference between the two approaches when it came to the iTunes HD television episode. Playing it on the HDMI adapter, as noted above, worked like a charm, but trying to play it over the VGA connector gave me a roadblock: HDCP checks will not let you play protected video out to an analog video destination. With its digital-to-digital pathway, the Kanex (along with other DP to HDMI solutions) has a big leg up here with purchased content.

Given that the Kanex adapter does a yeoman's job of getting the video and audio onto HDMI and over to your TV, is it a worthwhile buy? That same $70 could buy you an audio-free 10-foot mini DisplayPort / HDMI cable... seven times over. With basic no-audio adapters in the $10 range, and Monoprice listing what seems to be the same product as the Kanex for $50, there's a fairly limited target market for this gadget.

For anyone who doesn't mind a bit of cable clutter, it almost certainly makes financial and flexible sense to go with a less-expensive adapter sans audio and route the sound to a receiver or to aux ports on the TV. For those with VGA/RGB inputs and little interest in HDCP-locked content, you may be better off with a VGA cable and an audio ride-along.

If you're one of the AV-aesthetes who would rather have a single HDMI cable snaking across the living room to your laptop instead of a bundle of video and audio cables, you may be happy shelling out for the Kanex. Another point in its favor is that it will bundle your audio signal onto HDMI, making life easier if you don't have the option of auxiliary audio-in with your HDMI ports. Yes, there's a $40 DVI/TOSLINK adapter for HDMI; it requires its own power connection, though, and it's a bunch bigger & uglier than the Kanex. Is sleekness and ease of use worth the extra $30 to you?

Kanex is reporting that the adapter is sold out at the moment, but if and when you decide to give it a try I would double-check the company's return policy (or the third-party vendor's policy, if you can't get it direct) in case you discover that your particular setup doesn't play nicely with the unit.

The vendor provided a review unit for testing. To see TUAW's policy on hardware and software reviews, please visit http://www.tuaw.com/policies



Categories

Hardware Video Reviews Mac mini

When we first heard about the Kanex HDMI + digital audio converter a few weeks ago, I was eager to give it a trial run and see if it...
 

Add a Comment

*0 / 3000 Character Maximum

13 Comments

Filter by:
bob

Monoprice doesnt have it yet, not even an ETA. Maybe the author should do a little more research then copy/paste the first google result. Kanex looks like the real deal and MP ankle biters.

November 05 2009 at 3:25 PM Report abuse rate up rate down Reply
trabera

Am I missing something? I'm unsing a DVI -> HDMI and an optical mini plug -> optical TOSlink, both of which I bought from monoprice for a combined total of about $10. Most my MacBook Pro has recognized all TVs using this video cable.

-Josh

November 04 2009 at 1:45 PM Report abuse rate up rate down Reply
1 reply to trabera's comment
Michael Rose

Other than having to have 2 cables connected -- and that not all TVs will handle audio separately from the HDMI connector -- no, you're not missing anything. Like I said, it's pretty trivial to roll your own solution that will undercut the price on the Kanex.

November 04 2009 at 2:34 PM Report abuse rate up rate down Reply
mtk75

You may want to look at the options in your HDTV. Mine had edge enhancement turned on. It caused halos around text like you describe. It's usually turned off for the VGA inputs. It may also be associated with a "Sharpness" control.

Once I turned it off on my TV, I got much better picture, and could read the text much better.

-Matt

November 04 2009 at 12:45 PM Report abuse rate up rate down Reply
Luke P

Monoprice also carries this: http://tinyurl.com/yh4u9bc

It doesn't have toslink, but for most people I wouldn't think it'd be a dealbreaker....

November 04 2009 at 12:32 PM Report abuse rate up rate down Reply
Andy S.

It's a shame that they only make this for Mini DisplayPort... I have a Mac Mini (now two generations old) that only has DVI out, and something like this adapter for DVI would make it simple to set the machine up as a media Mac. Fortunately, they do have DVI to HDMI cables, and my home theater receiver can combine an HDMI and optical audio input into a single HDMI output, but still, it would be nice to not have to run more than one cable to my receiver.

November 04 2009 at 12:24 PM Report abuse rate up rate down Reply
1 reply to Andy S.'s comment
Michael Rose

Andy, see the final DVI/TOSLINK linked product at Monoprice -- it will combine audio and video onto HDMI.

November 04 2009 at 12:55 PM Report abuse rate up rate down Reply
bgcecil

Question for the masses....

I usually set my mac mini~TV to 1300x900 instead of 1080p... I do this so I can read Safari. I watch Hulu desktop, plex, Frontrow all in Full screen mode.

Will I get a better picture using Hulu Desktop or Plex (or whatever) in:

Full Screen mode at 1300x900
vs.
Full Screen mode at 1080p


I can't really tell the difference.



November 04 2009 at 12:15 PM Report abuse rate up rate down Reply
stainboy

glad to see you linking to the Monoprice cable. i was one of the people who wrote to them urging they create the Mini DisplayPort to HDMI cable, and they responded with several personal emails and actually created the cable! i like to see this kind of responsiveness to their customers rewarded!

November 04 2009 at 11:52 AM Report abuse rate up rate down Reply
2 replies to stainboy's comment
Dave

Your comment reminds me of the Windows 7 commercials: "Windows 7? My idea." :)

+1 for Monoprice. Great store. Great prices. Great selection.

November 04 2009 at 1:53 PM Report abuse rate up rate down Reply
stainboy

heh. well, it *was* pretty cool to have the general manager of Monoprice email me and ask a few questions before replying "I'll ask the factory to make this cable" and then follow through. win for everybody.

November 04 2009 at 2:43 PM Report abuse rate up rate down Reply
sinless

I just got one of the smaller hdmi adapters (the $60 one) the other day and was wondering if the same thing happens with this one. Everything from my mini looks great, but with 1080p resolution I can't read anything unless I go into each individual application and crank the fonts up. Is there any way to increase the font size across the board in Snow Leopard without lowering the resolution? I'll certainly live if there isn't, but it would be nice.

November 04 2009 at 11:31 AM Report abuse rate up rate down Reply
1 reply to sinless's comment
stainboy

i've been looking for the same solution, and unfortunately there's no "universal" font increase setting for Mac OS X yet. the only option you really have is to use the built-in "zoom" feature but it's far from ideal in our situation.

November 04 2009 at 11:54 AM Report abuse rate up rate down Reply
Buy an ad here

Hot Apps on TUAW

Tweets

© 2012 AOL Inc. All Rights Reserved.